2020 Toyota Tacoma Leaf Helper Spring Parts

Choose your Submodel for your 2020 Toyota Tacoma


Showing 1 - 8 of 8 products
Image
SKU
Product
Rating
Price

Hellwig
  • Up To 2000 lbs. Level Load Capacity
  • EZ-990 Helper Spring kit for 14-23 Tacoma Pick up and pre runner. Use on 05-13 Tacoma if you have swapped to the Toyota warranty leaf pack.
  • EZ-990 Helper Spring Kit
  • Product Attributes:
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Adjustable Length: Yes
  • Features:
    • Reduces Leaf Spring Wrap Up
    • A Cost Effective Spring Solution
    • Makes Your Heavy Load Driving Safer
    • Simple Bolt On Installation
    • High Quality Spring Steel Leaves
    • Limited Lifetime Warranty
  • Hellwig's medium-duty EZ-990 Helper Springs pack a lot of capability in every box. Packaged complete with the same heavy duty powder coated and plated components, hardware and installation instructions as our heavy duty helper spring products, these kits are designed for the vehicles that need lighter assistance in carrying a load. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. Ideally suited for light towing and loads, these units are fully adjustable using the heavy duty U-bolts included in the kit using simple hand tools. If your tow and haul needs change, simply adjust the heavy duty U-bolts to suit the new load requirements. Once installed and adjusted you are free to haul or tow with greater control and stability. Manufactured with heat treated ASTM 5160 alloy spring steel in our California based facility, these units are rated up to 2,000 lb. level load carrying capacity. They are a great cost effective spring solution and can be adjusted independently for uneven side to side loads.

Additional Fitment Information:
Vehicle Sub Model
2020 - Toyota Tacoma TRD Off-Road

Fabtech
  • 1.5 in. Lift; For PN[K7062DL/K703DL/K7064DL/K7065DL/K7063DL/K7064DL/K7065DL] 33/12.50R17 Tires w/17x8 Wheels w/4.625 in. BS w/Minor Trimming~275/70R18 Tires w/18x9 Wheels w/4.75 in. BS w/Minor Trimming~275/60R20 Tires w/20x9 Wheels w/5 in. BS w/Minor Trimming~For 6 Lug Vehicles
  • Add-A-Leaf Kit; 1.5 in. Lift; Rear; For PN[K7062DL/K703DL/K7064DL/K7065DL/K7063DL/K7064DL/K7065DL];
  • Add-A-Leaf Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm-www.p65warnings.ca.gov.
  • Features:
    • Modern Thin Leaf Technology
    • Effortless Installation
    • Smoothest Possible Ride
  • Bring your vehicle back up to its original height with the help of the Add-A-Leaf kit. This kit has all the performance you need. Designed to be strong yet flexible. You get the smoothest ride possible. That means that your wheels hug the road better during bumps and dips so you will not be bounced around in the drivers seat. And because of the high-quality construction this kit has plenty of muscle to handle the weight of your beast of a machine. Crafted to work seamlessly with your stock leaf springs you will get the perfect addition to your current suspension system. For added benefit installation of the Fabtech Add-A-Leaf kit is quick and painless thanks to the pre-drilled holes. Get precision performance and incredible style with the help of this suspension upgrade.

Additional Fitment Information:
Vehicle Block CC Position Engine CID
2020 - Toyota Tacoma V 3456 Rear 6 Cyl 3.5L -

Hellwig
  • SPECIAL DESIGN HELPER SPRING KIT
  • 2500 lbs. Capacity; Hammer Tone Powder Coat Finish; Simple Bolt On Installation
  • LP-15 Helper Spring for 2005-2023 Toyota Tacoma 2wd/4wd
  • Special Design Helper Spring Kit
  • Product Attributes:
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Adjustable Length: Yes
  • Features:
    • Enables Trucks To Carry Loads w/More Stability/Control
    • Fast Easy Bolt On Installation
    • Includes Heavy Duty Hardware
    • Progressive Rate Leaves Do Not Affect Ride When Unloaded
    • Set It/Forget It
    • High Quality Spring Steel Leaves
    • Adds New Life To Old Springs
    • Zinc Plated Hardware/Brackets For High Quality Finish
    • Long Life
    • Limited Lifetime Warranty
  • Special design, 5 add-a-leaf helper spring kit. Designed for heavy tow/haul applications.

Additional Fitment Information:
Vehicle Sub Model
2020 - Toyota Tacoma TRD Off-Road

Tuff Country
  • 2005-2022 Toyota Tacoma 4wd-Rear 2in. Long Add-a-Leafs Pair
  • 2 in.; Includes Center Pins; Pair
  • 2005-2023 Toyota Tacoma 4wd-Rear 2in. Long Add-a-Leafs Pair
  • Add-A-Leaf Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
  • Features:
    • Mounts To Existing Leaf Springs
    • Economical Method Of Lifting Vehicle w/Leaf Springs
    • Increases Payload Capacity
    • Center Pins Included
    • Great For Vehicles w/Winches Or Snowplows
  • Tuff Country add-a-leafs are an economical solution to lifting vehicles with leaf springs. These add-a-leafs are designed to be added to existing stock leaf springs to give a small amount of additional height or lift to your vehicle and gain additional payload capacity.

Additional Fitment Information:
Vehicle Position Sub Model Drive Type
2020 - Toyota Tacoma Rear TRD Off-Road 4WD

Tuff Country
  • 2005-2022 Toyota Tacoma 4wd-Rear 2in. Long Add-a-Leafs Pair
  • 2 in.; Includes Center Pins; Pair
  • 2005-2023 Toyota Tacoma 4wd-Rear 2in. Long Add-a-Leafs Pair
  • Add-A-Leaf Kit
  • Product Attributes:
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: This Product Contains Chemicals Known To The State Of California To Cause Cancer And Birth Defects Or Other Reproductive Harm. For More Information: Www.p65warnings.ca.gov
  • Features:
    • Mounts To Existing Leaf Springs
    • Economical Method Of Lifting Vehicle w/Leaf Springs
    • Increases Payload Capacity
    • Center Pins Included
    • Great For Vehicles w/Winches Or Snowplows
  • Tuff Country add-a-leafs are an economical solution to lifting vehicles with leaf springs. These add-a-leafs are designed to be added to existing stock leaf springs to give a small amount of additional height or lift to your vehicle and gain additional payload capacity.

Additional Fitment Information:
Vehicle Position Sub Model Drive Type
2020 - Toyota Tacoma Rear TRD Off-Road 4WD

ReadyLift
  • Lift Height 0.75 in. - 1.5 in.; w/Springs/Center Pin Bolts; Pair
  • Universal Add-A-Leaf; Front Or Rear; Lift Height 0.75 in. - 1.5 in.; w/Springs/Center Pin Bolts; Pair;
  • Universal Add-A-Leaf
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Universal Add-A-Leaf
  • ReadyLift provides an alternative rear lift solution for your lift needs. Due to demand from customers, we are now making available a universal rear add-a-leaf kit designed to work with Compact and Mid-size trucks such as the Tacoma, Frontier, Colorado, Canyon, Dakota and Ranger pickups. The rear leaf is designed to fit most compact and mid-size trucks that use a single guide pin for spring locating. The amount of rear lift will vary from .75 to 1.5 in. depending on the truck. This is a great alternative for upgrading the suspension for towing and hauling. Kit includes one pair of rear add-a-leaf springs and two center pin bolts.

Additional Fitment Information:
Vehicle Position
2020 - Toyota Tacoma Front

ReadyLift
  • Lift Height 0.75 in. - 1.5 in.; w/Springs/Center Pin Bolts; Pair
  • Universal Add-A-Leaf; Front Or Rear; Lift Height 0.75 in. - 1.5 in.; w/Springs/Center Pin Bolts; Pair;
  • Universal Add-A-Leaf
  • Product Attributes:
    • WARNING CA Proposition 65: No
  • Features:
    • Universal Add-A-Leaf
  • ReadyLift provides an alternative rear lift solution for your lift needs. Due to demand from customers, we are now making available a universal rear add-a-leaf kit designed to work with Compact and Mid-size trucks such as the Tacoma, Frontier, Colorado, Canyon, Dakota and Ranger pickups. The rear leaf is designed to fit most compact and mid-size trucks that use a single guide pin for spring locating. The amount of rear lift will vary from .75 to 1.5 in. depending on the truck. This is a great alternative for upgrading the suspension for towing and hauling. Kit includes one pair of rear add-a-leaf springs and two center pin bolts.

Additional Fitment Information:
Vehicle Position
2020 - Toyota Tacoma Rear

Hellwig
  • Up To 500 lbs. Level Load Capacity
  • EZ-550 Helper Spring Kit for Various Truck Makes and Models. See Vehicle Fitment
  • EZ-550 Helper Spring Kit
  • Product Attributes:
    • Mounting Hardware Included: Yes
    • WARNING CA Proposition 65: Yes
    • WARNING CA Proposition 65 Message: Warning: Cancer And Reproductive Harm - Www.p65warnings.ca.gov
    • Adjustable Length: Yes
  • Features:
    • Reduces Leaf Spring Wrap Up
    • A Cost Effective Spring Solution
    • Makes Your Heavy Load Driving Safer
    • Simple Bolt On Installation
    • High Quality Spring Steel Leaves
    • Limited Lifetime Warranty
  • Hellwig's light-duty EZ-550 Helper Springs pack a lot of capability in every box. Packaged complete with the same heavy duty powder coated and plated components, hardware and installation instructions as our heavy duty helper spring products, these kits are designed for the vehicles that need lighter assistance in carrying a load. Simple bolt on design using common hand tools provide the installer ease of installation and the vehicle owner hassle free use. Ideally suited for light towing and loads, these units are fully adjustable using the heavy duty U-bolts included in the kit using simple hand tools. If your tow and haul needs change, simply adjust the heavy duty U-bolts to suit the new load requirements. Once installed and adjusted you are free to haul or tow with greater control and stability. Manufactured with heat treated ASTM 5160 alloy spring steel in our California based facility, these units are rated up to 500 lb. level load carrying capacity. They are a great cost effective spring solution and can be adjusted independently for uneven side to side loads.

Additional Fitment Information:
Vehicle Sub Model
2020 - Toyota Tacoma TRD Off-Road
Showing 1 - 8 of 8 products

Loading...